Stonex R2 PLUS Total Station - User Manual 135
5. Search other device via Bluetooth
6. You will see the serial number of the connected
total station.
Then connect your device and R2-2 PLUS 500
through Bluetooth.
There is no pairing code for R2 PLUS series.
Run SurvCe of Carlson, and follow the procedure of previous paragraph .Now you can
select Bluetooth like connection , instead of RS232 by cable .Do the connection.
NOTE:
These designs, figures and specifications are subject to change without notice. We shall
not be held liable for damages resulting from errors in this instruction manual.
To Next Page
Loading...
