Symbol DS7708 - Page 523

STANDARD DEFAULT PARAMETERS A - 7
Code 128 Reduced Quiet Zone F8h 04h B8h 1208 Disable 12-55
Code 128 Security Level F1h EFh 751 Security Level 1 12-56
Ignore Code 128 <FNC4> F8h 04h E6h 1254 Disable 12-58
Code 39
Code 39 00h 0 Enable 12-59
Trioptic Code 39 0Dh 13 Disable 12-60
Convert Code 39 to Code 32 (Italian
Pharmacy Code)
56h 86 Disable 12-61
Code 32 Prefix E7h 231 Disable 12-62
Set Length(s) for Code 39 12h, 13h 18, 19 Length Within Range:
2 - 55
12-65
Code 39 Check Digit Verification 30h 48 Disable 12-66
Transmit Code 39 Check Digit 2Bh 43 Disable 12-67
Code 39 Full ASCII Conversion 11h 17 Disable 12-68
Code 39 Security Level F1h EEh 750 Security Level 1 12-69
Code 39 Reduced Quiet Zone F8h 04h B9h 1209 Disable 12-71
Code 93
Code 93 09h 9 Disable 12-72
Set Length(s) for Code 93 1Ah, 1Bh 26, 27 Length Within Range:
1 - 55
12-75
Code 11
Code 11 0Ah 10 Disable 12-76
Set Lengths for Code 11 1Ch, 1Dh 28, 29 4 to 55 12-79
Code 11 Check Digit Verification 34h 52 Disable 12-80
Transmit Code 11 Check Digit(s) 2Fh 47 Disable 12-82
Interleaved 2 of 5 (I 2 of 5)
I 2 of 5 06h 6 Enable 12-83
Set Lengths for I 2 of 5 16h, 17h 22, 23 6 - 55 12-84
I 2 of 5 Check Digit Verification 31h 49 Disable 12-87
Transmit I 2 of 5 Check Digit 2Ch 44 Disable 12-89
Table A-1 Standard Default Parameters Table (Continued)
Parameter SSI Number
1
Parameter
Number
2
Default
Page
Number
1
SSI number hex values are used for programming via SSI commands.
2
Parameter number decimal values are used for programming via RSM commands.