Tektronix Keithley 4200A-SCS - Page 199

Model 4200A-SCS Prober and External Instrument Control Section 8: Set up a probe station
4200A-913-01 Rev. A December 2020 8-17
Figure 130: Connect SMUs to N-channel MOSFET
5. The test runs vds-id-1x, which generates a family of curves (I
D
vs. V
D
) for the MOSFET.
6. The test moves to 3terminal-npn-bjt.
7. The action connect connects the SMUs to the probes for the npn transistor as shown in the
following figure.
Figure 131: Connect SMUs to NPN transistor