10: MACHINE MAINTENANCE
stone in a random motion to avoid changing the flatness of the
machine table.
If you find a lot of rust, or if there is rust on the machine's
slideways or ball screws, take photos of all rust-covered areas.
Create a support ticket with Tormach Technical Support at
tormach.com/how-to-submit-a-support-ticket for guidance on
how to proceed.
©Tormach® 2024
Specifications subject to change without notice.
Page 207 UM10811: 1500MX Operator's Manual (Version 0424A)
For the most recent version, see tormach.com/support
To Next Page
