Tormach 1500MX - Default Chapter; Table of Contents

SAFETY
19
1.1 Intended Use 20
1.2 Machine Standards 20
1.2.1 American National Safety Institute (ANSI) 20
1.2.2 Occupational Safety and Health Administration (OSHA) 20
1.3 Safety Overview 20
1.3.1 Safety Messages 20
Personal Injury 20
Property Damage 21
1.3.2 Safety Decals 21
On the Electrical Cabinet Door 21
Next to the Main Disconnect 22
On the Spindle Nose 22
1.3.3 Information Decals 23
Serial Number Plate 23
1.4 Machine Safety 23
1.4.1 General Shop Safety 23
1.4.2 Operational Safety 24
General 24
Tooling 24
Workholding 25
1.4.3 Electrical Safety 25
1.5 Noise Exposure 25
1.6 Operating Modes Reference 25
1.6.1 Run Mode (Mode 1) 25
1.6.2 Setup Mode (Mode 2) 26
1.6.3 Mode Constraints 26
1.6.4 Automatic Tool Changer (ATC) Constraints 27
ABOUT YOUR MACHINE
29
2.1 Machine Specifications 30
SITE REQUIREMENTS
33
3.1 General Site and Space Requirements 34
3.1.1 Site Requirements 34
3.1.2 Space Requirements 34
3.1.3 Operator Workstation Reference 34
3.2 Electrical and Power Requirements 34
3.2.1 Electrical Requirements 34
3.2.2 Power Requirements 34
TABLE OF CONTENTS