Tormach 1500MX - Next to the Main Disconnect; On the Spindle Nose

Next to the Main Disconnect
Figure 1-2: Example of a safety decal next to the Main
Disconnect.
1. WARNING! Entanglement / Entrapment Hazard. The
machine operates under automatic control — it can start
at any time and crush, cut, entangle, or pinch body
parts.Always keep clear of positions on the machine
where unexpected or unintended machine motion could
cause harm. Before operating this machine in any way,
you must verify that all operators know the location of
the machine's Emergency Stop button.
2. WARNING! Ejection Hazard. Fixtures, tooling,
workpieces, or other loose items can become dangerous
projectiles and can cause death or serious injury. Before
operating this machine in any way, you must verify that
you have appropriately secured all components.
3. WARNING! Fire Hazard.The machine and its enclosure
are not designed to contain fire or explosions. Only use
materials and coolants that are intended for the specific
machining operation. Never use flammable or explosive
items.Before operating the machine in any way, you
must read all Safety Data Sheets (SDSs) for any
workpiece materials, coatings, coolants, lubricants, and
other consumables used.
4. WARNING! Inhalation Hazard. The machine and its
enclosure do not protect you from airborne particulates.
Chips, dust, and vapors from certain materials can be
toxic or otherwise harmful. Before operating the
machine in any way, you must read all Safety Data
Sheets (SDSs) for any workpiece materials, coatings,
coolants, lubricants, and other consumables used.
5. Personal Protective Equipment:Eyes. Prevent injury by
always wearing protective safety eyewear. Before
operating this machine in any way, you must verify that
your eyewear is impact-resistant and rated for
ANSI787+.
6. Operator Knowledge. Before operating this machine in
any way, you and all other operators must read and
understand all instructions. If you don't, there's a risk of
voided warranty, property damage, serious injury, or
death.
On the Spindle Nose
Figure 1-3: Example of a safety decal on the spindle nose.
©Tormach® 2024
Specifications subject to change without notice.
Page 22 UM10811: 1500MX Operator's Manual (Version 0424A)
For the most recent version, see tormach.com/support
1: SAFETY