3: SITE REQUIREMENTS
l
No Ground Fault Circuit Interrupter Power for the
machine must not be protected by a ground fault circuit
interrupter (GFCI), as it interferes with the operation of
the variable frequency drive (VFD) spindle controller.
l
Proper Grounding You must properly ground the
power input to the machine. Examine the continuity
between bare metal on the machine frame and true
earth ground (a water pipe or similar) to verify that it's
properly grounded.
l
Correct Plug Pattern The machine is shipped with a
NEMA L6-30P plug, designed for use with a NEMAL6-
30R receptacle.
©Tormach® 2024
Specifications subject to change without notice.
Page 35 UM10811: 1500MX Operator's Manual (Version 0424A)
For the most recent version, see tormach.com/support
To Next Page
Loading...
