Tormach 1500MX - Page 9

©Tormach® 2024
Specifications subject to change without notice.
Page 9 UM10811: 1500MX Operator's Manual (Version 0424A)
For the most recent version, see tormach.com/support
TABLE OF CONTENTS
Edit G-Code with Conversational Programming 119
Change the Step Order 120
Create a New Job Assignment 120
Load an Existing G-Code File 120
Edit a Job Assignment 120
7.1.3 Read G-Code 120
Expand the G-Code Tab 120
About the G-Code Tab 120
Search in the Code 120
Set a New Start Line 121
Lead-In Moves 121
Change the View of the Tool Path Display 122
About the Tool Path Display 122
7.1.4 Use Conversational Programming 123
About Conversational Programming 123
Create a Face on a Part 123
About Facing 124
Facing in PathPilot 124
Facing Reference 124
Create a Profile on a Part 124
About Profiling 125
Profiling in PathPilot 125
Profiling Reference 126
Create a Pocket on a Part 126
About Pockets 127
Creating Pockets in PathPilot 127
About Circular Pockets 127
About Rectangular Pockets 127
Create Hole Locations on a Part (Drill/Tap) 128
About Drilling and Tapping 129
Drilling and Tapping in PathPilot 129
Create a Drilling Sequence 129
Create a Tapping Sequence 130
Drilling and Tapping Reference 130
Create Threads on a Part 130
About Thread Milling 131
Thread Milling in PathPilot 131
Thread Milling Reference 131
Create Text to Engrave on a Part 132
About Engraving 132
Import a DXFFile 132
Working with Layers and Shapes 133
Change the Layer or Shape Cut Order 133
Adjust the Tree View Window 133
Working in the Preview Window 133