Call Establishment
Issue 5 - 04/01 4-31
Accessing the Keypad without an Active Call
Established
Choose CALLS from the Main Menu.
Choose SUPP SVCS to display the following Supplementary
Services screen.
1 CALL FWD
2 KEYPAD
3 RESUME
Choose KEYPAD.
B1 KEYPAD
1 EN-BLOC
2 OVERLAP
Choose the dialling mode you want to use.
If you choose EN-BLOC, the characters are sent in a block
when you press the ENTER ( ) key; if you choose
OVERLAP, the characters are sent as you press the keys.
B1 KEYPAD B
Notes on entering Keypad Codes
If the characters you enter start with # or *, and end with #,
they are sent in a keypad facility information element.
For example if you enter *21*6489#, it will be sent in a
keypad facility information element.
Chap04s2.P65 30/04/01, 16:3631
To Next Page
Loading...