Trend AuroraPlus User Guide
4-32 429850
If you enter characters after the #, they are sent as a Called
Party Number information element.
For example if you enter *01*6489#90698, then *01*6489#
is sent in a keypad facility information element, and 90698 is
sent in the Called Party Number information element.
If the characters you enter start with a number, they will be
sent in a Called Party Number information element.
En-bloc dialling
When you are using en-bloc dialling you must enter the
characters before you can go off-hook.
Enter the Keypad code (refer to the appropriate Reference
Guide for your network's Supplementary Service codes).
The characters are displayed on the screen as you enter them:
B1 KEYPAD B
*346*#
Press the ENTER ( ) key.
The characters are sent.
B1 KEYPAD B
*346*#
To send another string, press CLEAR.
This returns you to the entry screen.
For information on how to send a Keypad code when a call
is active, see Accessing the Keypad during an Active Call.
Chap04s2.P65 30/04/01, 16:3632
To Next Page
Loading...