Unipulse F701-C

3.METHODS OF SETTING
29
- Weighing Function 3
- Sequence Mode
3 : AFFC. coefficient 1/4
2 : 〃 2/4
1 : 〃 3/4
0 : 〃 1
1 : Digital tare subtraction
ON
0 : Digital tare subtraction
OFF
2 : AFFC. ON
(Communication OP invalid)
1 : 〃 ON
0 : 〃 OFF
Average count of AFFC.
(1 ~ 9)
(For details, please refer to
"6-3" on P.83.)
(For details, please refer to
"5-13" on P.65.)
(For details, please refer to
"6-3" on P.83.)
(For details, please refer to
"6-3" on P.83.)
3
NEAR Z .
1 : Negative Compensation
Effect
0 : Negative Compensation
Inhibit
(For details, please refer to
"6-5" on P.89.)
1 : Sequence mode
0 : Simple comparison mode
(Sequence control)
1 : At start-time, weight
value check ON
0 : 〃 OFF
1 : Adjust feeding ON
0 : 〃 OFF
(Sequence control)
1 : At start-time,
Near Zero check ON
0 : 〃 OFF
(For details, please refer to
"6-9" on P.96.)
(For details, please refer to
"6-2-3" on P.82.)
(For details, please refer to
"6-9" on P.96.)
(For details, please refer to
"6-9" on P.96.)
4
SP1