Unipulse F701-C

3.METHODS OF SETTING
30
- Function Key Invalid
(For details, please refer to "5-17" on P.68.)
- Digital Filter
(For details, please refer to "5-3" on P.56.)
- Motion Detection
(For details, please refer to "5-6" on P.58.)
- Zero Tracking Period
(For details, please refer to "5-7" on P.60.)
- Zero Tracking Range
(For details, please refer to "5-7" on P.60.)
[TARE] key
1 : Valid
0 : Invalid
[GROSS / NET] key
1 : Valid
0 : Invalid
[TARE RESET] key
1 : Valid
0 : Invalid
[ZERO] key
1 : Valid
0 : Invalid
5
SP2
Digital Filter
(0 ~ 256)
6
CPS
Period (sec.) Range
* Set the stability detection parameter.
(0.0 ~ 9.9) (0 ~ 99)
－
．
7
OVER
Period (sec.)
(0.0 ~ 9.9)
．
8
UNDER
Range
(0 ~ 9999)
9
FINAL