Utax P-4532DN - (4-3) Detaching and refitting the relay-L PWB

4-31
Maintenance ＞ Assembly and disassembly
(4-3)Detaching and refitting the relay-L PWB
1
Detach the top cover assembly.
(See Page 4-21)
2
Detach the LSU fan motor.
1 Pull the connectors (a) out from relay-L PWB and then release the wires (c) from hooks (b).
2 Detach the LSU fan motor assembly (d) upward.
3
Detach the relay-L PWB.
1 Pull the connectors (a) and FFC (b) out and detach the relay-L PWB.
2 Check or replace the relay-L PWB (c) and refit all the removed parts.
a
d
b
c
c
a
b