Utax P-4532DN - (9) Setting altitude adjustment

2-18
Installation ＞ Installing the main unit
[CONFIDENTIAL]
Paper Size and Media Type for the Cassettes:
If the size dial is set to one of the sizes below, set the media type.
"A4", "A5", "B5", "Letter", "Legal" or "A6" (Cassette 1 only)
If the size dial is set to "Other", configure the settings for the paper size and the media type.
1
Display the screen.
1 [Menu] key > [▲] [▼] key > [Paper Settings] > [OK] key > [▲] [▼] key >
[Cassette 1 (to 5) Set.] > [OK] key
2
Specify the media type.
1 [▲] [▼] key > [Media Type] > [OK] key
2 Select the media type, and select the [OK] key.
3
Specify the paper size.
1 [▲] [▼] key > [Other Paper Size] > [OK] key
2 Select the paper size, and select the [OK] key.
If you selected [Custom], use the procedure below to specify the paper length and width.
3 [▲] [▼] key > [Custom PaperSize] in "Cassette 1 (to 5) Set." > [OK] key > [▲] [▼] key > [Measurement] > [OK]
key
4 Select the paper size units, and select the [OK] key.
5 [▲] [▼] key > [Size Entry(Y)] > [OK] key
6 Enter the paper length, and select the [OK] key.
7 [▲] [▼] key > [Size Entry(X)] > [OK] key
8 Enter the paper width, and select the [OK] key.
(9) Setting altitude adjustment
Execute [Altitude Adjustment] from the System Menu when setting up at a high altitude place.
When the printing quality declines in the environment of an altitude higher than 1000m sea level, the setting of
[Altitude Adjustment] mode can recover the printing quality.
1 Enter the Service Setting menu.
2 Select [Altitude Adj.] using the cursor ［▲］［▼］ keys.
3 Press the ［OK］ key.
Note
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Note
Use the numeric keys or select the [▲] or [▼] key to enter a number.