Utax P-4532DN - (3) Jam Codes

7-25
Troubleshooting ＞ Paper misfeed detection
[CONFIDENTIAL]
(3) Jam Codes
Code Contents Conditions Jam
location*
0000 Initial jam The power is turned on when a sensor in the conveying
system is on.
-
0100 Secondary paper feed request time
out
Secondary paper feed request given by the controller is
unreachable.
-
0101 Waiting for process package to be
ready
Process package won’t be ready. -
0104 Waiting for conveying package to be
ready
Conveying package won’t be ready. -
0105 Drive intrerrupt jam A drive does not stop. -
0106 Paper feeding request for duplex
printing time out
Paper feeding request for duplex printing given by the
controller is unreachable.
-
0107 Waiting for fuser package to be ready Fuser package won’t be ready. -
0110 Rear cover 1 open The rear cover is opened during printing. -
0111 Top cover open
Bulk feeder cover open
The top cover or the bulk feeder cover is opened during
printing.
-
0120 Receiving a duplex paper feeding
request while paper is empty
Paper feed request was received from the duplex section
despite the absence of paper in the duplex section.
-
0121 Exceeding number of duplex pages
circulated
The controller issued the duplex section a request for more
pages than the duplex print cycle contains.
-
0501 No paper feed of jam The registration sensor 2 does not turn on during paper feed
from cassette 1.
A
0502 PF feed sensor 1 does not turn on during paper feed from
cassette 2.
E
0503 PF feed sensor 2 does not turn on during paper feed from
cassette 3.
F
0504 PF feed sensor 3 does not turn on during paper feed from
cassette 4.
G
0505 PF feed sensor 4 does not turn on during paper feed from
cassette 5.
H
0508 The registration sensor 2 does not turn on during paper feed
from duplex section.
B
0509
The registration sensor 2 does not turn on during paper
feed from MP tray.
C
0511 Multiple sheets of jam The registration sensor 2 does not turn off during paper feed
from cassette 1.
B
0512 PF feed sensor 1 does not turn off during paper feed from
cassette 2.
B
0513 PF feed sensor 2 does not turn off during paper feed from
cassette 3.
B
0514 PF feed sensor 3 does not turn off during paper feed from
cassette 4.
B
0515 PF feed sensor 4 does not turn off during paper feed from
cassette 5.
B
0518 The registration sensor 2 does not turn off during paper feed
from duplex section.
B
0519 The registration sensor 2 does not turn off during paper feed
from MP tray.
B
0529 No paper feed of jam
(Bulk feeder)
The registration sensor 2 does not turn on during paper feed
from bulk feeder.
D