Utax P-4532DN - 2 - 5 Optional Function

2-30
Installation ＞ Optional Function
[CONFIDENTIAL]
2 - 5 Optional Function
*1: This can be used on a trial basis for a limited time.
Starting Application Use
Use the procedure below to start using an application.
1 [Menu] key > [▲] [▼] key > [Op Functions] > [OK] key
2 Select the desired application, and select the [OK] key.
3 [▲] [▼] key > [License On] > [OK] key.
4 To use the application as a trial, select [Trial] without entering the license key.
5 Enter the license key > [OK] key
Some applications do not require you to enter a license key. If the license key entry screen does not appear,
go to Step 6.
6 Select [Yes].
Application
Data Encryption (Data Encryption/Overwrite) UG-33 (ThinPrint Option)
*1
ID Card (Card Authentication Kit)
*1
Note
• Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
Note
The factory default login user name and login password are set as shown below.
• 45 ppm model: Login User Name/ Login Password： 4500 / 4500
• 50 ppm model: Login User Name/ Login Password： 5000 / 5000
• 55 ppm model: Login User Name/ Login Password： 5500 / 5500
• 60 ppm model: Login User Name/ Login Password： 6000 / 6000
Note
• You can view detailed information on the selected application by selecting [Detail].
Note
If you started the Data Encryption/Overwrite or Thin Print option, turn the power OFF/ON.