5-4
Firmware ＞ Firmware update
[CONFIDENTIAL]
• When [Completed] is displayed, the firmware update is completed.
• Check if the new firmware versions are displayed.
• When there is no corresponding master file, "No Change" is displayed.
The "*" is displayed behind the target firmware name, if when has been skipped update.
• [----------] is displayed when the optional equipment is not installed.
In case of the error completion
FW-Update 1/23
[ENGN] 24/23
[PLP] 2/23
Completed
2TX.1000.001.002
2TX.S000.001.005
-
-
-
-
FW-Update 1/23
[ENGN] 23/23
[PLP] 2/23
Error
Error 0801
2TX.Q000.001.005
-
-
-
-
To Next Page
Loading...
