6-7
Service mode ＞ Service settings
[CONFIDENTIAL]
(28)
RP Code Code the engine software version and the date of update.
(29)
Code the main software version and the date of update.
(30)
Code the engine software version and the date of the previ-
ous update.
(31)
Code the main software version and the date of the previous
update.
(32)
High altitude adjustment set data Normal/1001-2000m/2001-3000m/3001-3500m
(33) Transfer Adjustment
標準/線画優先
(34) Fuser Adjustment 1/2
(35) System Firmware(Details) -
(36)
NV RAM version _ 1F3 1225 _ 1F3 1225
(a) (b) (c) (d) (e) (f)
(a) Consistency of the present software version and the data-
base
_ (underscore): OK
* (Asterisk): NG
(b) Database version
(c) The oldest time stamp of database version
(d) Consistency of the present software version and the ME
firmware version
_ (underscore): OK
* (Asterisk): NG
(e) ME firmware version
(f) The oldest time stamp of the ME database version
Normal if (a) and (d) are underscored, and (b) and (e) are
identical with (c) and (f).
(37)
Mac address -
(38)
Destination information -
(39)
Area information -
(40)
Margin settings Top margin/Left margin
(41)
Top offset for each paper source MP tray/Paper feeder 1/Paper feeder 2/
Paper feeder 3/Paper feeder 4/Duplex/Page rotation
(42)
Left offset for each paper source MP tray/Paper feeder 1/Paper feeder 2/
Paper feeder 3/Paper feeder 4/Duplex/Page rotation
(43)
L value settings Top margin integer part / Top margin decimal part/
Left margin integer part / Left margin decimal part/
(44)
Life counter (The first line)
Machine life/MP tray/Cassette1
/ Cassette2/ Cassette3/
Cassette4/ Cassette51/ Duplex/ Bulk paper feeder
(45)
Life counter (The second line)
Drum unit
/ Fuser unit
(46) Life counter (The third line) Maintenance kit/ Maintenance kit pre-set
(47)
Panel lock information F00: OFF
F01: Partial Lock 1
F02: Partial Lock 2
F03: Partial Lock 3
F04: Full Lock
No. Description Supplement
To Next Page
Loading...
