6-24
Service mode ＞ Service settings
[CONFIDENTIAL]
MC
Contents
Sets the main charger output.
Execution is possible only when the altitude adjustment mode is set to [Normal].
Purpose
Execute when the image density declines, dirt of a background or an offset has occurred.
Method
1 Enter the Service Setting menu.
2 Select [MC] using the ［▲］［▼］ keys.
3 Press the [OK] key.
4 Select [1] to [7] using the cursor up/down keys.
5 Press the [OK] key. The setting is set.
Completion
Press the [Stop] key.
Transfer Adj.
Contents
Set the transfer current (when the carrier leaking occurs).
Purpose
If you select line text priority, the transfer current is set high and the carrier leaking is improved.
Method
1 Enter the Service Setting menu.
2 Select [Transfer Adj.] using the ［▲］［▼］ keys.
3 Press the [OK] key.
4 Select [Standard] or [Line text priority] using the ［▲］［▼］ keys.
5 Press the [OK] key.
Completion
Press the [Stop] key.
To Next Page
Loading...
