9-4
Appendixes ＞ Firmware environment commands
[CONFIDENTIAL]
Linefeed action *1 P3 0: Ignores
1: LF
2: CR+LF
1
KPDL auto switching P4 0: None
1: Auto switching
0
1(KDA)
AES option 1-After AES is started, the
data neither applicable to KPDL nor auto
switching (alternate) emulation is
processed in KPDL
P7 After AES is started, the data neither applicable to KPDL nor
auto switching (alternate) emulation is processed in KPDL.
0: AES activated by all the page exit commands.
1: None
2: AES activated by all the page exit commands and
Prescribe EXIT command.
3: AES activated by Prescribe EXIT command only.
4: AES activated by ^L command only.
6: AES activated by Prescribe EXIT command and ^L
command.
After AES is started, the data neither applicable to KPDL nor
auto switching (alternate) emulation is processed in KPDL.
10: AES activated by all the page exit commands and
Prescribe EXIT command.
10
11(KDA)
Command recognition character P9 ASCII code of 33 to 126 82(R)
Items FRPO Setting value Factory
setting
To Next Page
Loading...
