9-6
Appendixes ＞ Firmware environment commands
[CONFIDENTIAL]
Wide A4 T6 0: OFF
1: ON
0
Line spacing *1 U0 Lines per inch (integer value) 6
Line spacing *1 U1 Lines per inch (fraction value) 0
Character spacing *1 U2 Characters per inch (integer value) 10
Character spacing *1 U3 Characters per inch (fraction value) 0
Country code of the resident fonts U6 0: US
1: France
2: Germany
3: U.K.
4: Denmark
5: Sweden
6: Italy
7: Spain
8: Japan
9: US legal
10: IBM PC-850 (Multi-lingual)
11: IBM PC-860 (Portuguese)
12: IBM PC-863 (Canadian French)
13: IBM PC-865 (Norwegian)
14: Norway
15: Denmark 2
16: Spain 2
17: Latin America
21: US ASCII (U7 = 50 SET)
77: HP Roman-8 (U4 = 52 SET)
41
0(KDJ)
Supported symbol sets U7 0: Same as the default emulation mode (P1)
1: IBM
6: IBM PC-8
50: US ASCII (U6 = 21 SET)
52: HP Roman-8 (U6 = 77 SET)
53
0(KDJ)
Default font pitch *1 U8 Integer section of Default font pitch: 0 to 99 10
U9 Decimal section of Default font pitch: 0 to 99 0
ANK outline font size at start-up*1 V0 Integer value of ANK outline font size at power-up
Upper 2-digit/valid value: 00 to 09
0
V1 Integer value of ANK outline font size at power-up
Lower 2-digit/valid value: 00 to 99
12
V2 Decimal value of ANK outline font size at power-up
Valid value: 00, 25, 50, 75
0
Items FRPO Setting value Factory
setting
To Next Page
Loading...
