9-9
Appendixes ＞ Firmware environment commands
[CONFIDENTIAL]
*1: Ignored depending on emulation
*2: KDJ only
Forced duplex printing setting (Media
type is Preprinted, Prepunched and
Letterhead only)
Y4 0: OFF
1: ON
0
PDF direct printing Y5 0: Zoom depending on paper size
1: Loads paper which is the same size as the image
2: Loads Letter, A4 size paper depending on the image
sizeEnlarges or reduces the image to fit in the current paper
size
3: Loads Letter, A4 size paper depending on the image size
8: Printed in full magnification
9: Loads Letter, A4 size paper depending on the image size
10: Loads Letter, A4 size paper depending on the image
sizeEnlarges or reduces the image to fit in the current paper
size
13-99: The same operation as default value (0).
0
e-MPS error Y6 0: No error control
1: Output the error list
2: Displays the error
3: Displays the error and prints the error report
3
Items FRPO Setting value Factory
setting
To Next Page
Loading...
