Utax P-4532DN - Page 43

2-15
Installation ＞ Installing the main unit
[CONFIDENTIAL]
4 Select the [OK] key.
5 [▲] [▼] key > [Subnet Mask] > [OK] key
6 Set the subnet mask.
7 Select the [OK] key.
8 [▲] [▼] key > [Default Gateway] > [OK] key
9 Set the default gateway.
10Select the [OK] key.
11[▲] [▼] key > [Auto-IP] > [OK] key
12[Off] > [OK] key
When setting the DNS server
In the following cases, set the IP address of DNS (Domain Name System) server.
• When using the host name with "DHCP" setting set to [Off].
• When using the DNS server with IP address that is not assigned by DHCP automatically.
1 [▲] [▼] key > [DNS Server] > [OK] key
2 [▲] [▼] key > [Auto (DHCP)] or [Manual] > [OK] key
When [Manual] is selected.
You can enter static DNS server information in the Primary and Secondary fields provided.
Note
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which is shown highlighted.
Note
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which is shown highlighted.
Important
After changing the setting, restart the network from System Menu, or turn the machine OFF and then ON.