Vacon 100 - Page 136

Table 48: DC brake parameters
Index Parameter Min Max Unit Default ID Description
P3.4.4.1 DC Brake Current 0 IL A IH 507
Gives the current that
is fed into the motor
during DC braking.
0 = Disabled
P3.4.4.2
DC Braking Time at
Stop
0.00 600.00 s 0.00 508
Tells if the braking is
ON or OFF and gives
the braking time when
the motor stops.
P3.4.4.3
Frequency to Start
DC Braking at Ramp
Stop
0.10 10.00 Hz 1.50 515
The output frequency
at which the DC
braking starts.
Table 49: Flux braking parameters
Index Parameter Min Max Unit Default ID Description
P3.4.5.1
Flux Braking 0 1 0 520
0 = Disabled
1 = Enabled
P3.4.5.2 Flux Braking Current 0 IL A IH 519
Gives the current level
for the flux braking.
VACON · 136 PARAMETERS MENU
5
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205