Vacon 100 - Page 173

Table 82: PID controller basic settings
Index Parameter Min Max Unit Default ID Description
P3.13.1.9
Dead Band Varies Varies Varies 0 1056
The dead band area
around the setpoint in
process units. The PID
output is locked if the
feedback stays within
the dead band area for
the set time.
P3.13.1.10
Dead Band Delay 0.00 320.00 s 0.00 1057
If the feedback stays in
the dead band area for
the set time, the output
is locked.
PARAMETERS MENU VACON · 173
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
5