Vacon 100 - Page 192

Table 95: Process supervision of the external PID controller
Index Parameter Min Max Unit Default ID Description
P3.14.4.1 Enable Supervision 0 1 0 1659
0 = Disabled
1 = Enabled
P3.14.4.2 Upper Limit Varies Varies Varies Varies 1660
P3.14.4.3 Lower Limit Varies Varies Varies Varies 1661
P3.14.4.4 Delay 0 30000 s 0 1662
If the target value is
not reached in this
time, a fault or an
alarm shows.
P3.14.4.5
Response to External
PID Supervision
Fault
0 3 2 757
See P3.9.1.11.
VACON · 192 PARAMETERS MENU
5
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205