2 To go to the Edit mode, push the OK button 2 times
or push the arrow button Right.
STOP
READY
I/O
Rem Control Place
M3.2.1ID:
Edit
Help
Add to favourites
3 To set a new value, push the arrow buttons Up and
Down.
STOP
READY
I/O
Rem Control Place
M3.2.1ID:
FieldbusCTRL
I/O Control
4 To accept the change, push the OK button. To
ignore the change, use the Back/Reset button.
EDITING THE NUMERICAL VALUES
1 Find the parameter.
STOP
READY
I/O
Frequency Ref
P3.3.1.1ID:101
MaxFreqReference
0.00 Hz
MinFreqReference
50.00 Hz
PosFreqRefLimit
320.00 Hz
2 Go to the Edit mode.
STOP
READY
I/O
MinFreqReference
P3.3.1.1ID:101
0.00 Hz
Min: 0.00Hz
Max: 50.00Hz
USER INTERFACES VACON · 77
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
3