3 If the value is numerical, move from digit to digit
with the arrow buttons Left and Right. Change the
digits with the arrow buttons Up and Down.
STOP
READY
I/O
MinFreqReference
P3.3.1.1ID:101
00.00 Hz
Min: 0.00Hz
Max: 50.00Hz
4 To accept the change, push the OK button. To
ignore the change, go back to the level where you
were before with the Back/Reset button.
STOP
READY
I/O
MinFreqReference
P3.3.1.1ID:101
11.00 Hz
Min: 0.00Hz
Max: 50.00Hz
THE SELECTION OF MORE THAN 1 VALUE
Some parameters let you to make a selection of more than 1 value. Make a checkbox
selection at each value you wish to activate.
1 Find the parameter. There is a symbol on the
display when a checkbox selection is possible.
STOP
READY
I/O
P3.12.1.3ID:1466
Interval 1
00:00:00
00:00:00
ON Time
OFF Time
Days
0
A
A. The symbol
of the
checkbox
selection
VACON · 78 USER INTERFACES
3
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205
To Next Page
Loading...
