Maintenance0380−1/A1
Winterthur Gas & Diesel Ltd.
10/ 10
The indicated maintenance intervals must be taken as guidance and may vary
depending on the installation. The proper intervals are subject to the points
mentioned below. Experience will show whether these intervals can be extended or
must be shortened.
1) Environmental and operating conditions
2) Heavy fuel oil and lubricating oil qualities (see Operating Manual 0710−1 and
0750−1)
3) Engine load
4) Fuel, lubricating oil and cooling water care (see Operating Manual 0720−1 and
0760−1)
5) Overhaul according to Maintenance Manual
6) Genuine spare parts used
7) Engine monitoring
8) Engines according to specifications of WinGD Ltd.
On the engine sectional drawings 0803−1, those parts are marked with group
numbers, as they are found in the Maintenance Manual.
2016-01
Inspection and Overhaul Intervals (Guidelines)
To Next Page
Loading...
