06/2014
9-24
WC 5022/5024
9.1.9 Network Print Kit
Version 1.0
Installation/Removal
Figure 4 j0mg41903
8. Remove the Blind Cover. (PL 19.4)
9. Remove the Rear Cover. (Figure 5)
a. Remove the screw (x5).
b. Remove the Rear Cover.
Figure 5 j0mg41904
10. Install the Net I/F PWB. (Figure 6)
a. Install the Net I/F PWB.
Figure 6 j0mg41852
11. Install the Bracket. (Figure 7)
a. Install the Bracket.
b. Secure it by using the screw (x2).
Figure 7 j0mg91032
12. Reinstall the parts that were removed in Steps 6 to 9.
13. Plug the power cord into power outlet, and turn ON the power switch.
14. Check the operation of the Network Print Kit.
15. Explain to the customer how to operate the Network Print Kit where necessary.
To Next Page
Loading...
