Effect parameter list
342
Appendix
27: NoiseGt (NOISE GATE)
1 Threshold -72~-30dB Input level at which the gate begins to open
2 Attack 1~40ms Time until when the gate begins to open
3 Release 10~680ms Time until the gate closes
4 Output Level 0~127 Output level
28: Chorus (CHORUS), 29: Celeste (CELESTE)
1 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.00Hz~39.7Hz Delay modulation frequency
3 LFO Depth 0~127 Delay modulation depth
4 Feedback Level -63~+63 Level at which the delay output is returned to the input (negative values invert the phase)
5 Delay Offset 0~12.7ms Offset value for delay modulation
6 EQ Low Frequency 32Hz~2.0kHz Frequency at which the EQ will boost/cut the low range
7 EQ Low Gain -12~+12dB Gain with which the EQ will boost/cut the low range
8 EQ Mid Frequency 100Hz~10.0kHz Frequency at which the EQ will boost/cut the mid range
9 EQ Mid Gain -12~+12dB Gain with which the EQ will boost/cut the mid range
10 EQ Mid Width 1.0~12.0 Width of the mid range area which the EQ will boost/cut
11 EQ High Frequency 500Hz~16.0kHz Frequency at which the EQ will boost/cut the high range
12 EQ High Gain -12~+12dB Gain with which the EQ will boost/cut the high range
13 Input Mode mono/stereo Mono/stereo selection for the input
30: Flanger (FLANGER)
1 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.00Hz~39.7Hz Frequency of delay modulation
3 LFO Depth 0~127 Depth of delay modulation
4 Feedback Level -63~+63 Level at which delay output is returned to the input
5 Delay Offset 0~12.7ms Offset value for delay modulation
6 LFOPhaseDifference -180~+180deg L/R phase difference of modulation waveform (no difference at 0 deg (=64))
7 EQ Low Frequency 32Hz~2.0kHz Frequency at which the EQ will boost/cut the low range
8 EQ Low Gain -12~+12dB Gain with which the EQ will boost/cut the low range
9 EQ Mid Frequency 100Hz~10.0kHz Frequency at which the EQ will boost/cut the mid range
10 EQ Mid Gain -12~+12dB Gain with which the EQ will boost/cut the mid range
11 EQ Mid Width 1.0~12.0 Width of the mid range area which the EQ will boost/cut
12 EQ High Frequency 500Hz~16.0kHz Frequency at which the EQ will boost/cut the high range
13 EQ High Gain -12~+12dB Gain with which the EQ will boost/cut the high range
31: Sympho (SYMPHONIC)
1 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.00Hz~39.7Hz Frequency of delay modulation
3 LFO Depth 0~127 Depth of delay modulation
4 Delay Offset 0~50.0ms Delay modulation offset value
5 EQ Low Frequency 32Hz~2.0kHz Frequency at which the EQ will boost/cut the low range
6 EQ Low Gain -12~+12dB Gain with which the EQ will boost/cut the low range
7 EQ Mid Frequency 100Hz~10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Mid Gain -12~+12dB Gain with which the EQ will boost/cut the mid range
9 EQ Mid Width 1.0~12.0 Width of the mid range area which the EQ will boost/cut
10 EQ High Frequency 500Hz~16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12~+12dB Gain with which the EQ will boost/cut the high range
32: Phaser1 (PHASER 1)
1 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.00Hz~39.7Hz Frequency of phase modulation
3 LFO Depth 0~127 Depth of phase modulation
4 Phase Shift Offset 0~127 Phase shift offset value
5 Feedback Level -63~+63 Level at which phaser output will be returned to the input (negative values invert the phase)
6 Stage 4~12 Number of phaser shifter stages
7 Diffusion mono, stereo Diffusion
8 EQ Low Frequency 32Hz~2.0kHz Frequency at which the EQ will boost/cut the low range
9 EQ Low Gain -12~+12dB Gain with which the EQ will boost/cut the low range
10 EQ High Frequency 500Hz~16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12~+12dB Gain with which the EQ will boost/cut the high range
To Next Page
Loading...
Need help?
General
