ENGINE SPECIFICATIONS
2-2
EAS20290
ENGINE SPECIFICATIONS
Engine
Engine type Liquid cooled 4-stroke, SOHC
Displacement 1304.0 cm³
Cylinder arrangement V-type 2-cylinder
Bore × stroke 100.0 × 83.0 mm (3.94 × 3.27 in)
Compression ratio 9.50 :1
Standard compression pressure (at sea level) 1450 kPa/400 r/min (206.2 psi/400 r/min) (14.5
kgf/cm²/400 r/min)
Minimum–maximum 1200–1500 kPa (170.7–213.3 psi) (12.0–15.0
kgf/cm²)
Starting system Electric starter
Fuel
Recommended fuel Regular unleaded gasoline only (Europe)
Unleaded gasoline only (AUS)
Fuel tank capacity 19.0 L (5.02 US gal) (4.18 Imp.gal)
Fuel reserve amount 3.7 L (0.98 US gal) (0.81 Imp.gal)
Engine oil
Lubrication system Wet sump
Type SAE20W40
Recommended engine oil grade API service SG type or higher, JASO standard
MA
Engine oil quantity
Total amount 3.70 L (3.91 US qt) (3.26 Imp.qt)
Without oil filter cartridge replacement 3.20 L (3.38 US qt) (2.82 Imp.qt)
With oil filter cartridge replacement 3.40 L (3.59 US qt) (2.99 Imp.qt)
Oil filter
Oil filter type Cartridge (paper)
Oil pump
Oil pump type Trochoid
Inner-rotor-to-outer-rotor-tip clearance Less than 0.12 mm (0.0047 in)
Limit 0.20 mm (0.0079 in)
Outer-rotor-to-oil-pump-housing clearance 0.09–0.19 mm (0.0035–0.0075 in)
Limit 0.26 mm (0.0102 in)
Oil-pump-housing-to-inner-and-outer-rotor
clearance 0.06–0.13 mm (0.0024–0.0051 in)
Limit 0.20 mm (0.0079 in)
Bypass valve opening pressure 80.0–120.0 kPa (11.6–17.4 psi) (0.80–1.20
kgf/cm²)
Relief valve operating pressure 391.0–489.0 kPa (56.7–70.9 psi) (3.91–4.89
kgf/cm²)
Cooling system
Radiator capacity (including all routes) 2.10 L (2.22 US qt) (1.85 Imp.qt)
Radiator capacity 0.55 L (0.58 US qt) (0.48 Imp.qt)
Coolant reservoir capacity (up to the maximum level
mark) 0.45 L (0.48 US qt) (0.40 Imp.qt)
To Next Page
Loading...
