CHASSIS SPECIFICATIONS
2-9
EAS20300
CHASSIS SPECIFICATIONS
Chassis
Frame type Double cradle
Caster angle 32.70 °
Trail 145.0 mm (5.71 in)
Front wheel
Wheel type Cast wheel
Rim size 16M/C × MT3.00
Rim material Aluminum
Wheel travel 135.0 mm (5.31 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Rear wheel
Wheel type Cast wheel
Rim size 16M/C × MT4.50
Rim material Aluminum
Wheel travel 110.0 mm (4.33 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Front tire
Type Tubeless
Size 130/90 16M/C 67H
Manufacturer/model DUNLOP/D404F X
Manufacturer/model BRIDGESTONE/EXEDRA G721
Wear limit (front) 1.6 mm (0.06 in)
Rear tire
Type Tubeless
Size 170/70B 16M/C 75H
Manufacturer/model DUNLOP/K555
Manufacturer/model BRIDGESTONE/EXEDRA G722 G
Wear limit (rear) 1.6 mm (0.06 in)
Tire air pressure (measured on cold tires)
Loading condition 0–90 kg (0–198 lb)
Front 250 kPa (36 psi) (2.50 kgf/cm²)
Rear 280 kPa (41 psi) (2.80 kgf/cm²)
Loading condition 90–210 kg (198–463 lb)
Front 250 kPa (36 psi) (2.50 kgf/cm²)
Rear 280 kPa (41 psi) (2.80 kgf/cm²)
Front brake
Type Dual disc brake
Operation Right hand operation
Front brake lever free play 2.0–5.0 mm (0.08–0.20 in)
Front disc brake
Disc outside diameter × thickness 298.0 × 5.0 mm (11.73 × 0.20 in)
Brake disc thickness limit 4.5 mm (0.18 in)
To Next Page
Loading...
