CABLE ROUTING
2-50
1. Horn
2. Rear brake light switch
3. Rear brake master cylinder
4. Brake fluid reservoir hose
5. Coolant reservoir breather hose
6. Rear brake hose
7. Rear brake caliper
8. Brake fluid reservoir
A. Fasten the rear brake hose and brake fluid
reservoir hose with the plastic bands, making sure
to align the white paint marks on the brake fluid
reservoir hose with the bands.
B. Install the rear brake hose onto the rear brake
caliper, making sure that the brake pipe touches
the projection on the caliper.
C. Face the ends of the hose clamp inward.
D. Face the end of the hose clamp upward as shown
in the illustration.
E. Install the brake fluid reservoir hose onto the rear
brake master cylinder, making sure that the brake
pipe touches the projection on the rear brake
master cylinder bracket.
F. Insert the projection on the plastic band completely
into the hole in the coolant reservoir cover bracket.
G. Less than 3 mm (0.12 in)
To Next Page
Loading...
