1) Parameter transfer DONE, ERROR, STATUS and RESULT1/2
Parameter Declaration Data type Description
ACT INPUT BOOL Job triggered by edge change 0-1 of the memory bit ACT
ID INPUT INT Connection ID according to configuration
LADDR INPUT WORD Base address of CP in hardware configuration
CMD INPUT INT Job ID
DONE OUTPUT BOOL Execution code
ERROR OUTPUT BOOL Error code
Parameters
VIPA SPEED7
Network Communication
Ethernet Communication > FC 10 - AG_CNTRL - Control CP 343
HB00 | OPL_SP7 | Operation list | en | 18-30 145
To Next Page
Loading...
