EasyManua.ls Logo

YASKAWA VIPA SPEED7 - Page 170

YASKAWA VIPA SPEED7
1007 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ERROR STATUS Description
1 8B07h Parameter error, the length of the parameter field is invalid.
1 8B08h Parameter error, the ID of the subfield is invalid.
1 8B09h System error, the connection does not exist.
1 8B0Ah Data error, the content of the subfield is not correct.
1 8B0Bh Structure error, a subfield exists twice.
1 8B0Ch Data error, the parameter does not contain all the necessary parameters.
1 8B0Dh Data error, the CONF_DB does not contain a parameter field for system data.
1 8B0Eh Data error/structure error, the CONF_DB type is invalid.
1 8B0Fh System error, the CP does not have enough resources to process CONF_DB com-
pletely.
1 8B10 Data error, configuration by the user program is not set.
1 8B11 Data error, the specified type of parameter field is invalid.
1 8B12 Data error, too many connections were specified.
1 8B13 CP internal error
1 8F22h Area length error reading a parameter.
1 8F23h Area length error writing a parameter.
1 8F24h Area error reading a parameter.
1 8F25h Area error writing a parameter.
1 8F28h Alignment error reading a parameter.
1 8F29h Alignment error writing a parameter.
1 8F30h The parameter is in the write-protected first current data block.
1 8F31h The parameter is in the write-protected second current data block.
1 8F32h The parameter contains a DB number that is too high.
1 8F33h DB number error
1 8F3Ah The target area was not loaded (DB).
1 8F42h Timeout reading a parameter from the I/O area.
1 8F43h Timeout writing a parameter from the I/O area.
1 8F44h Address of the parameter to be read is disabled in the accessed rack.
1 8F45h Address of the parameter to be written is disabled in the accessed rack.
1 8F7Fh Internal error
8.2.13.3 Configuration Data Block
The configuration data block (CONF_DB) contains all the connection data and configura-
tion data (IP address, subnet mask, default router, NTP time server and other parame-
ters) for an Ethernet CP. The configuration data block is transferred to the CP with func-
tion block FB 55.
VIPA SPEED7
Network Communication
Ethernet Communication > FB 55 - IP_CONF - Progr. Communication Connections
HB00 | OPL_SP7 | Operation list | en | 18-30 170

Table of Contents

Related product manuals