YASKAWA VIPA SPEED7 - Page 174

Subfield Parameter
ID Type Length
(byte)
Description Special fea-
tures
Use
23 SUB_ADDR_IN_DATA_
BLOCK
4 + 1 Select free UDP connection.
The remote node is entered in the job
header of the job buffer by the user program
when it calls AG_SEND. This allows any
node on Ethernet/LAN/WAN to be reached.
Possible values:
1 = free UDP connection
0 = otherwise
optional
1) the coding may be combined with OR operations
Subfield Parameter
ID Type Length (byte) Description Special features Use
1 SUB_IP_V4 4 + 4 IP address of the remote station
according to IPv4
mandatory
1
11 SUB_LOC_PORT Length TSAP
+ 4
TSAP of the local station mandatory
12 SUB_REM_PORT Length TSAP
+ 4
TSAP of the remote station
mandatory
1
18 SUB_CONNECT_NAME Length Name
+ 4
Name of the connection optional
19 SUB_LOC_MODE 4 + 1 Local mode of the connection
Possible values:
0x00 = SEND/RECV
0x10 = S5-addressing mode for FETCH/
WRITE
2
0x80 = FETCH
2
0x40 = WRITE
2
If you do not set the parameter, the
default setting is SEND/RECV. For
FETCH/WRITE a passive connection
setup is necessary
optional
21 SUB_KBUS_ADR - - Value: fix 2 optional
ISO-on-TCP connection
VIPA SPEED7
Network Communication
Ethernet Communication > FB 55 - IP_CONF - Progr. Communication Connections
HB00 | OPL_SP7 | Operation list | en | 18-30 174