YASKAWA VIPA SPEED7 - Page 173

Subfield Parameter
ID Type Length (byte) Description Special features Use
22 SUB_CON_ESTABL 4 + 1 Type of connection establishment.
With this option, you specify whether the
connection is established by this station.
Possible values:
0 = passive
1 = active
mandatory
1) Option using passive connection
2) the coding may be combined with OR operations
Subfield Parameter
ID Type Length
(byte)
Description Special fea-
tures
Use
1 SUB_IP_V4 4 + 4 IP address of the remote station according to IPv4 mandatory
9 SUB_LOC_PORT 4 + 2 Port of the local station mandatory
10 SUB_REM_PORT 4 + 2 Port of the remote station mandatory
18 SUB_CON-
NECT_NAME
Length
Name
+ 4
Name of the connection optional
19 SUB_LOC_MODE 4 + 1 Local mode of the connection
Possible values:
0x00 = SEND/REC0x10 = S5-addressing mode for FETCH/
WRITE
1
0x80 = FETCH
1
0x40 = WRITE
1
If you do not set the parameter, the default setting is SEND/
RECV. For FETCH/WRITE a passive connection setup is
necessary
optional
21 SUB_KBUS_ADR - - Value: fix 2 optional
UDP connection
VIPA SPEED7
Network Communication
Ethernet Communication > FB 55 - IP_CONF - Progr. Communication Connections
HB00 | OPL_SP7 | Operation list | en | 18-30 173