The installation of the PROFINET IO device ‘VIPA SLIO CPU’ happens in the hardware
catalog with the following approach:
1. Go to the service area of www.vipa.com.
2. Download the configuration file for your CPU from the download area via
‘Config files è PROFINET’.
3. Extract the file into your working directory.
4. Start the Siemens hardware configurator.
5. Close all the projects.
6.
Select ‘Options è Install new GSD file’.
7. Navigate to your working directory and install the according GSDML file.
ð
After the installation the according PROFINET IO device can be found at
‘PROFINET IO è Additional field devices è I/O è VIPA SLIO System’.
The installation of the PROFINET IO devices ‘EtherCAT Network’ happens in the hard-
ware catalog with the following approach:
1. Go to the service area of www.vipa.com
2.
Load from the download area at ‘Config files è EtherCAT’ the GSDML file for your
EtherCAT master.
3. Extract the files into your working directory.
4. Start the Siemens hardware configurator.
5. Close all the projects.
6.
Select ‘Options è Install new GSD file’.
7. Navigate to your working directory and install the according GSDML file.
ð
After the installation the ‘EtherCAT Network’ can be found at ‘PROFINET IO
è Additional field devices è I/O è VIPA VIPA EtherCAT System’.
The configuration of the PROFINET IO device ‘EtherCAT Network’ happens by means of
the SPEED7 EtherCAT Manager from VIPA. This may be found in the service area of
www.vipa.com at ‘Service/Support è Downloads è Software’.
The installation happens with the following proceeding:
1. Close the Siemens SIMATIC Manager.
2. Go to the service area of www.vipa.com
3. Load the SPEED7 EtherCAT Manager and unzip it on your PC.
4. For installation start the file EtherCATManager_v... .exe.
5. Select the language for the installation.
6. Accept the licensing agreement.
7. Select the installation directory and start the installation.
8. After installation you have to reboot your PC.
ð
The SPEED7 EtherCAT Manager is installed and can now be called via the con-
text menu of the Siemens SIMATIC Manager.
Installing the IO device
‘VIPA SLIO System’
Installing the IO device
EtherCAT network
Installing the SPEED7
EtherCAT Manager
VIPA SPEED7
Motion control - Simple Motion Control Library
Usage Sigma-5/7 EtherCAT > Usage Sigma-5 EtherCAT
HB00 | OPL_SP7 | Operation list | en | 18-30 304
To Next Page
Loading...
