4. The operating parameters required for PWM are internally adapted to the corre-
sponding values. Leave all values unchanged.
5. Close the dialog with [OK].
6.
Select ‘Project è Compile all’.
13.4.4.2 User program
In the ‘Catalog’ , open the ‘Simple Motion Control’ library at ‘Blocks’ and drag and
drop the following blocks into ‘Program blocks’ of the Project tree:
n V1000 PWM
– FB885 – VMC_AxisControlV1000PWM
Ä
Chap. 13.4.7.1 ‘FB 885 -
VMC_AxisControlV1000_PWM - Axis control over PWM’ page 449
Copy block to project
VIPA SPEED7
Motion control - Simple Motion Control Library
Usage inverter drive via PWM > Usage in VIPA SPEED7 Studio
HB00 | OPL_SP7 | Operation list | en | 18-30 436
To Next Page
Loading...
