When a template is placed in a process picture, the associated variables are automati-
cally generated with their technical units. These can be customized via the properties.
To adapt the technical units, e.g. for speed, click at ‘Resources > SimpleMotion >
Real Time DB > Variables > VMC_AxisControl > ..._Out > Members > Velocity’ and
select ‘Context menu è Properties’.
ð
You can adjust the corresponding values at ‘Engineering Data’ . Confirm with
your settings.
Adjust technical units
VIPA SPEED7
Motion control - Simple Motion Control Library
Controlling the drive via HMI > Modify the project in Movicon
HB00 | OPL_SP7 | Operation list | en | 18-30 625
To Next Page
Loading...
