2. Since the connection to the CPU is via TCP/IP, enable in the ‘List available comm
drivers’ the driver ‘VIPA’ > ‘Ethernet S7 TCP’ and click at [Next].
ð
The communication driver ‘S7 TCP’ is listed at ‘Resources > SimpleMotion >
Real Time DB > Comm.Drivers’ .
3.
Click at ‘S7 TCP’ and select ‘Context menu è Comm. I/O Driver Settings’.
ð
The ‘S7 TCP’ dialog opens.
4. Select the register ‘Stations’ .
VIPA SPEED7
Motion control - Simple Motion Control Library
Controlling the drive via HMI > Modify the project in Movicon
HB00 | OPL_SP7 | Operation list | en | 18-30 627
To Next Page
Loading...
