5. To add a new station, click [+ Add].
ð
The dialog ‘Station Properties’ opens.
6. Enter a station name at ‘Station Name’ . Allowed characters: A-Z, a-z, 0-9 space
and the separators "_" and "-"
Enter at ‘Server Address’ the IP address of your CPU and click at [OK].
7. Negate the query for importing variables from the PLC database and close the ‘S7
TCP’ dialog with [OK].
VIPA SPEED7
Motion control - Simple Motion Control Library
Controlling the drive via HMI > Modify the project in Movicon
HB00 | OPL_SP7 | Operation list | en | 18-30 628
To Next Page
Loading...
