OB85_EV_CLASS OB85_FLT_ID Variable Description
35h A1h, A2h As a result of your configuration your program or
the operating system creates a start event for an
OB that is not loaded on the CPU.
A1h, A2h OB85_Z1 The respective local variable of the called OB that
is determined by OB85_Z23.
A1h, A2h OB85_Z23 high word:
Class and number of the event causing the OB
call
low word, high byte:
Program level and OB active at the time of error
low word, low byte:
Active OB
35h A3h Error when the operating system accesses a
module
OB85_Z1 Error ID of the operating system
high byte:
1: Integrated function
2: IEC-Timer
low byte:
0: no error resolution
1: block not loaded
2: area length error
3: write-protect error
OB85_Z23 high word: block number
low word:
Relative address of the MC7 command causing
the error. The block type must be taken from
OB85_DKZ23.
(88h: OB, 8Ch: FC, 8Eh: FB, 8Ah: DB)
35h A4h PROFINET DB cannot be addressed
34h A4h PROFINET DB can be addressed again
39h B1h I/O access error when updating the process
image of the inputs
B2h I/O access error when transferring the output
process image to the output modules
B1h, B2h OB85_DKZ23 ID of the type of process image transfer where
the I/O access error happened.
10h: Byte access
20h: Word access
30h: DWord access
57h: Transmitting a configured consistency range
VIPA SPEED7
Organization Blocks
Asynchronous error Interrupts > OB 85 - OBNL_FLT - Priority Class Error
HB00 | OPL_SP7 | Operation list | en | 18-30 94
To Next Page
Loading...
