Zebra ZT600 Series User Manual

Printer Setup and Operation
81
10. Click Next.
You are notified that the printer is already installed.
11. Click Add new printer.
You are prompted for a printer name, the port to which the printer will be connected, and the language
for the printer display.
12. Click Add Port.
The wizard prompts you for a name for the port and the IP address of your printer.
n
Note • If you have other applications open, you may be prompted that the driver is locked by another
process. You may click Next to continue or Exit to allow you to save your work before continuing with
this installation.

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C