1-8
200 Type set to A.
binary
Syntax
binary
View
FTP client view
Parameters
None
Description
Use the binary command to specify that program files be transferred in binary mode, which is used for
transferring program files.
By default, files are transferred in ASCII mode.
Related commands: ascii.
Examples
# Specify to transfer files in binary mode.
[ftp] binary
200 Type set to I.
bye
Syntax
bye
View
FTP client view
Parameters
None
Description
Use the bye command to terminate the control connection and data connection with the FTP server
and return to user view.
This command has the same effect as that of the quit command.
Examples
# Terminate the connections with the remote FTP server and return to user view.
[ftp] bye
221 Server closing.
<Sysname>
To Next Page
Loading...
