3Com 5500-EI PWR - Display Mpm Group

1-3
Table 1-2 display mpm forwarding-table command output description
Field Description
Total 1 entry(entries) Total number of the entries
00001 Entry number
(120.0.0.2, 225.0.0.2) Source address-group address pair
iif Vlan-interface1200
The incoming VLAN interface is VLAN-interface
1200.
1 oif(s): One outgoing VLAN interface is listed.
Vlan-interface32
Ethernet1/0/19
The first outgoing VLAN-interface is
VLAN-interface 32, with one outgoing port under
it, Ethernet 1/0/19
Total 1 entry(entries) Listed
The multicast forward table contains one (S,G)
entry.
display mpm group
Syntax
display mpm group [ vlan vlan-id ]
View
Any view
Parameters
vlan vlan-id: Specifies a VLAN. With a VLAN specified, this command displays the IGMP group
information in the specified VLAN; otherwise, the command displays the information of all IGMP group
entries.
Description
Use the display mpm group command to display the IGMP group entries containing port information
on the switch.
Related commands: display igmp group.
Examples
# Display IGMP group entries containing port information in VLAN 1200.
<Sysname> display mpm group vlan 1200
Total 1 IP Group(s).
Total 1 MAC Group(s).
Vlan(id):1200.
Total 1 IP Group(s).
Total 1 MAC Group(s).
Static Router port(s):
Dynamic Router port(s):