3Com 5500-EI PWR - Multicast Storing-Enable; Multicast Storing-Packet

1-13
multicast storing-enable
Syntax
multicast storing-enable
undo multicast storing-enable
View
System view
Parameters
None
Description
Use the multicast storing-enable command to enable the multicast packet buffering feature.
Use the undo multicast storing-enable command to disable the multicast packet buffering feature.
With the multicast packet buffering feature enabled, multicast packets delivered to the CPU are buffered
while the corresponding multicast forwarding entries are being created and forwarded out according to
the multicast forwarding entries after entry creation.
By default, this function is not enabled.
Examples
# Enable the multicast packet buffering feature.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] multicast storing-enable
multicast storing-packet
Syntax
multicast storing-packet packet-number
View
System view
Parameters
packet-number: Maximum number of packets that can be buffered per multicast forwarding entry,
ranging from 10 to 100.
Description
Use the multicast storing-packet command to specify the maximum number of packets that can be
buffered per multicast forwarding entry.
By default, up to 100 packets can be buffered per multicast forwarding entry.
Examples
# Configure to allow a maximum of 50 packets to be buffered per multicast group.