2-3
Table 2-2 display igmp interface command output description
Field Description
Vlan-interface1 (10.153.17.99): Interface name (IP address)
IGMP is enabled
IGMP is currently enabled on the interface.
If IGMP is not enabled, no output information is
displayed.
Current IGMP version is 2
IGMP version 2 (default) is running on the
current interface. Currently, two IGMP versions
are available: IGMPv1 and IGMPv2.
Value of query interval for IGMP(in seconds): 60 The IGMP query interval is 60 seconds (default).
Value of other querier time out for IGMP(in
seconds): 120
The other querier present interval is 120 seconds
(default).
Value of maximum query response time for
IGMP(in seconds): 10
The maximum response time for IGMP general
queries is 10 seconds (default).
Value of robust count for IGMP: 2 The IGMP robustness variable is 2 (default).
Value of startup query interval for IGMP(in
seconds): 15
The IGMP startup query interval is 15 seconds
(default).
Value of last member query interval for IGMP(in
seconds): 1
The IGMP last member query interval is 1 second
(default).
Value of query timeout for IGMP version 1(in
seconds): 400
The query timeout time for IGMPv1 is 400
seconds (default).
Policy to accept IGMP reports: none
IGMP multicast group filtering policy for
controlling the access to multicast groups.
“None” means no filtering policy is applied;
otherwise, the applied policy is displayed. For
example, “acl 2000, only for IGMP version 1”
means ACL 2000 is applied only on IGMPv1
reports.
Querier for IGMP: 10.1.0.5 (this router)
The IGMP querier address is 10.1.0.5 (this
device).
IGMP group limit: 256
The maximum number of IGMP multicast groups
that can be joined on the VLAN interface is 256.
Total 1 IGMP group reported
Total number of IGMP multicast groups on the
interface is 1.
igmp enable
Syntax
igmp enable
undo igmp enable
View
Interface view
Parameters
None
To Next Page
Loading...
