6-2
Table 6-1 Description on the fields of the display memory command
Field Description
Unit Specifies a Unit ID
System Available Memory(bytes) Free memory size, in bytes, of the switch
System Used Memory(bytes) Occupied memory size, in bytes, of the switch
Used Rate Memory occupation rate
display memory limit
Syntax
display memory limit
Mode
Any view
Parameters
None
Description
Use the display memory limit command to display the memory setting and state information of the
switch.
This command displays the current memory limit configuration, free memory, and state information
about connections, such as times of disconnection, times of reconnection, and whether the current
state is normal.
Examples
# Display the current memory setting and state information.
<Sysname> display memory limit
Current memory limit configuration information:
system memory safety: 5 (MBytes)
system memory limit: 4 (MBytes)
auto-establish enabled
Free Memory: 17506496 (Bytes)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal
Table 6-2 Description on the fields of the display memory limit command
Field Description
system memory safety Safety value of the switch memory.
To Next Page
Loading...
